MVP 3

V-Plow

western mvp 3 snowplow

The Western MVP 3 V-Plow gives you all the power and performance you need for commercial plowing. With extreme flared wings, up to 45″ on the heavy-duty 10’6″ model, and double-acting cylinders, the MVP 3 has earned its reputation as a reliable plow for getting more jobs done faster.

Unique Features

  • Flared blades soar from a 35″ center height up to a full 45″ at the outer edge on heavy-duty 10’6″ models
  • Available in 14-gauge powder-coated, stainless steel, and 1/4″ high-density polyethylene in 8’6″ and 9’6″ widths
  • 10’6″ models are available in 11-gauge powder-coated steel and 12-gauge stainless steel options
  • The MVP 3 features a clean-scraping 70-degree attack angle, and comes with a standard 6″, high-carbon steel cutting edge
  • Eight vertical ribs and the exclusive WESTERN POWERBAR provide exceptional torsional strength and rigidity
  • A 1-1/4″ diameter, heat-treated steel center pin in a three-connection-point hinge keep the wings tight for optimal performance
  • UltraLock double-acting cylinders allow the operator to use the MVP 3 in straight blade mode by locking the wings together
  • A snow control gap cover over the center hinge helps deflect and prevent snow from being lost over the top of the blade
  • Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles
  • A tractor-compatible mount kit is designed for easy installation onto a wide range of tractor models
  • Bolt-on curb guards protect the outer edge of your MVP 3 snow plow from wear (standard on the 10’6″ model)

8’6″ Product Specs

  • Moldboard Options: steel/stainless/poly
  • Blade Width: 8’6″
  • Blade Height: 31″ at center; 38″ at end
  • Blade Thickness: 14 ga steel; 0.25″ poly
  • Trip Springs: 4
  • Ribs: 8
  • Lift Cylinder: 1.75″ x 8″
  • Angling Rams: 1.75″ x 11″
  • Plowing Width (full angle): 7’5″ full angle; 7’2″ scoop; 7’8″ full V
  • Approx Weight (without mount): 940 lbs steel; 890 lbs poly
  • Cutting Edge: 0.375″ x 6″; 0.5″ x 6″ (optional)
  • Mount Type: UltraMount 2

9’6″ Product Specs

  • Moldboard Options: steel/stainless/poly
  • Blade Width: 9’6″
  • Blade Height: 31″ at center; 39″ at end
  • Blade Thickness: 14 ga steel; 0.25″ poly
  • Trip Springs: 6
  • Ribs: 8
  • Lift Cylinder: 1.75″ x 8″
  • Angling Rams: 1.75″ x 11″
  • Plowing Width (full angle): 8’6″ full angle; 8’2″ scoop; 8’7″ full V
  • Approx Weight (without mount): 1,022 lbs steel; 972 lbs poly
  • Cutting Edge: 0.5″ x 6″
  • Mount Type: UltraMount 2

10’6″ Product Specs

  • Moldboard Options: steel/stainless
  • Blade Width: 10’6″
  • Blade Height: 35″ at center; 45″ at end
  • Blade Thickness: 11 ga steel; 12 ga stainless
  • Trip Springs: 6
  • Ribs: 8
  • Lift Cylinder: 1.75″ x 8″
  • Angling Rams: 2″ x 11″
  • Plowing Width (full angle): 9’9″ full angle; 9’7″ scoop; 9’11” full V
  • Approx Weight (without mount): 1,196 lbs
  • Cutting Edge: 0.5″ x 6″
  • Mount Type: UltraMount 2

Download Western Snow Plow Brochure