Western Heavy-Duty UTV straight blade snow plow

Impact Heavy-Duty UTV

V-Plow | Straight Blade Snow Plow

Western Plows Impact heavy-duty UTV snow plows

Constructed from high-strength, low alloy steel components, the Western Impact heavy-duty plows feature an easy-on/easy-off mounting system, removable receiver brackets, and Scrape Lock for clean scraping and back dragging.

Unique Features

  • The Impact UTV straight blade plow features a 14-gauge powder coated steel moldboard that is 6 ft wide with a standard 5″ steel cutting edge.
  • The Impact straight blade features four vertical ribs and high-strength alloy steel ensure the plow is strong enough for commercial operation and light enough to fit more UTVs.
  • The Impact flared UTV v-plow blades go from a 25.25″ center height to a full 29.25″ at the outer edge. The 14-gauge powder coated steel moldboard is 6 ft wide with a standard 5″ high carbon steel cutting edge.
  • The Impact UTV v-plow features six vertical ribs and high-strength, low-weight alloy steel components provide a favorable strength-to-weight ratio, keeping stress off of the UTV frame
  • When fully angled or in V mode, the Impact UTV v-plow plowing path is 5 ft wide and 4’7″ in scoop.
  • A standard feature on the Impact UTV v-plow, UltraLock double-acting cylinders allow you to use the v-plow in straight blade mode by locking the wings together. The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
  • Whether in V, scoop or straight blade configuration, the trip-edge on the Impact UTV v-plow helps protect the plow, equipment and operator.
  • The Impact UTV v-plow has a snow control gap cover over the center hinge to help deflect and prevent snow from being lost over the top of the blade.
  • Hydraulic Scrape Lock holds the blade down for more efficient scraping and clean back dragging.

Product Specs

MODELS V-Plow Straight Blade
Moldboard steel steel
Blade Width 6’0″ 6’0″
Blade Height 25.75″ at center; 29.25″ at end 23.5″
Blade Thickness 14 ga 14 ga
Trip Springs 2 2
Ribs 6 4
Lift Cylinder 1.5″ x 6″ 1.5″ x 6″
Angling Rams 1″ x 8.75″ 1″ x 7″
Plowing Width (full angle) 5’0″ full angle; 4’7″ scoop; 5’0″ full V 5’4″
Approx Weight (without mount) 354 lbs 261 lbs
Cutting Edge 0.25″ x 5″ 0.25″ x 5″

Download Western Snow Plow Brochure

Product Request

  • Vehicle Information